Author: corrosion

🚀 Unveiling Our Latest Innovation: Full-Scale Test Rig for Liquid Anhydrous Ammonia Exposure 🌍 We're thrilled to share an exciting milestone in our engineering journey—a state-of-the-art full-scale test rig designed for liquid anhydrous ammonia exposure testing. This cutting-edge development, achieved in collaboration with our R&D and industry partners (Cetim - Centre technique des industries mécaniques ), represents a significant leap forward in ensuring the safety, durability, and performance of systems exposed to one of the most demanding environments in industrial applications. 🔍 Key Features of the Test Rig:✅ Full-scale simulation capabilities for real-world exposure conditions.✅ Advanced monitoring systems to capture critical performance.✅ Designed with safety and environmental responsibility at its core.✅ Built to support material and system testing across various industries. 💡 Why It Matters:Anhydrous ammonia plays a pivotal role in sectors like refrigeration, agriculture, and Hydrogen energy carrier, but…

The French Corrosion Institute is a research partner of the European IPCEI project focusing on hydrogen underground storage leaded by the Slovakian group NAFTA. The first progress meeting of the project was held at Bratislava the 19th of September 2024. More information of the project website: https://projecthenri.eu

Event supported by Research Institutes of Sweden, Institut de la Corrosion (France), University of Parma (Italy), and European Federation of Corrosion (EFC). PROGRAMME Time Session Registration 8:45 Introduction Welcome speech 9:05 Symposium opening - Dominique Thierry (RISE) 9:10 Soil corrosion Insight of the corrosion mechanisms in soil: key parameters and application cases - Mathieu Debure (BRGM) 9:30 Key parameters in soil corrosion -an in-situ monitoring - Erwan Diler (Institut de la corrosion) 9:50 Microbial corrosion in soil - Pierangela Cristiani (Ricerca sul Sistema Energetico) 10:10 Electrochemical multiparametric probe for the on-line monitoring of corrosion in soils - Luca Murachelli (Polytecnico Milano 1863) 10:30 Open discussion 10:45 Coffee break 11.00 Metallic coatings Metallic coatings -chemistry & application processes - Jennifer Schulz (ThyssenKrupp) 11:20 Soil corrosion evaluation of metallic coated steels -…

Development of test capabilities in liquid and gasous ammonia and cryogenic temperatures at the French Corrosion Institute – Saint Etienne Site. Several jacketed autoclaves and test cells are available for specimens exposure in liquid amonia below -35°C. Gas NH3 gas permeability at low temperature is also possible. The comissionning of a new test room for ammonia testing is ongoing.

Commissioning of a new test room dedicated to material testing under hydrogen pressure at The French Corrosion Institute – Saint-Etienne site. New equipments have been invested to extend the pressure range we can investigate, to allow for testing in contaminated gas (mainly in presence of H2S) and offer new test methods applicable in research projects and consultencies. Several test frames are now available : o Several autoclaves for batch exposures up to 300°C/300 bar. o Two test frames for fracture toughness and fatigue crack growth. rate evaluations up to 700 bar and -150/180°C. o Several permeation test cells up to 400 bar. o One test frame for slow strain rate and Ripple load test up to 185 bar. o Cryogenic test using hollow specimens down to -150°C. o Thermodesorption spectroscopy.…

The French Corrosion Institute continues developing R&D and test services for material resistance evaluation under gaseous hydrogen pressure. In addition to our standard test capabilities, we can also adapt to specific requirements and develop “on-demand” test method. In this example, we have produced for one of our client, a “fit-for-purpose” test bench capable to simulate the exposure of tubing to pressure cycles of several tens of bar of hydrogen. The equipment is operated to mimic the real pressure cycle to which the part will be exposed in service. The number of cycles is defined to simulate the full life time of the product and ensure its integrity in service.

The French Corrosion Institute and RISE together with the Member Research Consortium ‘Corrosion Properties of Coil-coated Products’ are organizing the 5th International Symposium ' Corrosion of Prepainted Materials’. It will be held on May 31st, 2023 in the beautiful city of Stockholm (Sweden) in Van Den Nootska Palatset. The symposium will feature presentations by selected speakers that cover the following topics: Surface and Adhesion properties, Advanced techniques, Performance of prepainted materials, Mechanisms... ProgramRegister Save the date and register before April 28, 2023 Registration contact : aurelia.santin@institut-corrosion.fr - Chairman : nathalie.lebozec@institut-corrosion.fr

Follow all the news from Institut de la Corrosion on our Linkedin site

New Training sessions in Cathodic Protection for Seawater application sector in October 2021 for levels 2 and 3 Registration forms available on the website (Activities / Training)

The site of Saint-Etienne is currently modifying its capabilities to allow test under H2 pressure.Experiments under static (constant load, permeation) and dynamic loading (Slow Strain Rate Test, Incremental Step loading) were already succesfully implemented up to 100 bar